How to use Sani-Clean 3 Foam Gun system
Step 1: Identify Detergent (Degreaser) and Rinse Switches
Step 2: Turn Detergent switch to ON (vertical) position
Step 3: Squeeze handheld spray device and direct foam onto surface to be cleaned.
Note: may take up to 30 seconds to generate foam.
Step 4 (End of Shift): After use, turn off Detergent switch and turn Rinse switch to ON.
Run rinse until large foam is no longer visible, which may take up to 30 seconds. Turn all switches to OFF position. Hang hose back onto carrier.